Canon Printer Error 5200 occurs mostly due to low ink levels and also when the printer has a defective cartridge or a logic board problem. The Canon printer is designed to put together all the remaining ink colours to render black. In short, this means that the ink cartridge that is mounted in your Canon printer is either blank or close to finished.
Techniques to fix Canon printer error 5200:
The following are some easy steps that can help you to fix the Canon Support Code 5200:
- Turn off the printer and after a few minutes, turn it on again.
- The turn on and off will let you know the correct ink level.
- Check if the error is resolved, in case not, proceed with the next step.
- Remove the printer power cable.
- Turn off the printer and keep holding the Stop button for a few seconds. After this, press and hold the button for a while. Release the ‘Stop’ button.
- Click the ‘Stop’ button 5 times and then release the ‘On’ button.
- Your LCD will turn blank and your device will reset. Turn on and off your printer one more time.
- If you have executed all the steps and are still facing trouble, try setting the ink level to fix the concern.
Your Canon printer error code 5200 will be resolved. In case not, you can proceed with the alternative steps to fix the concern.
Method to Fix Canon printer error code 5200:
Method 1
- Turn off the printer.
- Plugin the ‘Power Cable’ and wait for at least five minutes.
- Turn on your printer and check if the issue is fixed or not.
Method 2
- With printhead, you need to take out the ink cartridges.
- Turn on the printer, install the ink cartridge and printhead.
Method 3
- Turn off your Canon printer.
- Press and hold the ‘Reset’ button.
- Make sure that you have clicked on the ‘On’ button.
- When you click on the ‘On’ button and you need to release the ‘Reset’ button.
- Now, click on the Reset button two times and then release the ‘On’ button.
- After this, you need to press the Reset button for ‘Four’ times and press the ‘On’ button along with it two times.
- Turn off your printer and check if the error code is fixed or not.
I hope this will help you to resolve the Canon printer error code 5200.
